Close

Categories

Site Information

  • B&K Precision 9832 Programmable AC Power Source, 2 kVA
  • B&K Precision 9832 Programmable AC Power Source, 2 kVA, rear panel

B&K Precision 9832 Programmable AC Power Source, 2 kVA

$6,450.00
Quantity:

Product Description

  • 0 to 150 VAC range, max. current = 20 A, not to exceed 2000 VA
  • 0 to 300 VAC range, max. current = 10 A, not to exceed 2000 VA
  • Output frequency adjustable from 45 Hz to 1200 Hz
  • 0 to ±212 VDC, 10 A or 0 to ±424 VDC, 5 A, not to exceed 1000 W
  • Low total harmonic distortion meets the IEC 61000-3-2 standard
  • Comprehensive measurement capabilities Vrms, Arms, Vdc, +Apk, -Apk, inrush current, frequency, power factor, apparent power, reactive power, true power, and crest factor
  • 0.98 power factor at AC input stage
  • Built-in standard waveforms sine, square and clipped sine
  • 30 built-in THD waveforms
  • Amplifier mode with 1.2 kHz bandwidth for generating user-defined arbitrary waveforms
  • Step, List and Pulse modes for generating power line disturbance (PLD) simulations
  • List mode supports 10 user-defined programs with up to 100 programmable steps
  • Generate custom harmonic waveforms on a PC and download them to the instrument’s 5 non-volatile memory locations
  • Digital I/O port supporting external trigger, transient indication, failure status indication, remote inhibit, RS232, and external analog output level programming interface
  • Comprehensive protection modes OVP, OCP,OPP, OTP, fan failure, output timer and key lock
  • Downloadable LabVIEW driver and soft panel software for remote control
  • Standard USB (USBTMC-compliant), RS-232, LAN, and GPIB remote interfaces
  • Three-year warranty

Fully-programmable AC source
B&K Precision 9830 Series programmable AC power sources provide high performance and low total harmonic distortion in a 3U form factor. The addition of positive and negative DC offset voltages expands the AC capabilities to operate in DC and AC+DC output coupling modes. The user can select built-in and user-defined harmonic waveforms or select from standard sine, square or clipped sine outputs. The high output current crest factor and low input resistance are suitable for high inrush current measurements when evaluating capacitive or inductive loads.

Applications

  • Pre-compliance testing according to IEC61000-3-2 and IEC61000-4-11/14/28/34
  • Simulate common grid faults, voltage dips and other disturbances
  • Evaluate transformers, TRIACs, SCRs, and passive components

Includes: AC power cord with input connector, test report & certificate of calibration

Optional Accessories: Rackmount Kit RK3U

DOWNLOADS:
Data Sheet (2.7M)
User Manual (3.6M)

Warranty Information

Three Year Warranty

Other Details

Output VA:
2000VA

Find Similar Products by Tag

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category